Get quotes

Free tool

Square metre calculator

Add each room by its shape and measurements in metres. The total updates as you type, with square feet and a sketch of the rooms to scale.

Square metre calculatorFree tool · FloorPlan.co.za

01Rooms metres, e.g. 4.2

    02Convert an area

    Rooms total
    0 m²
    In square feet
    –
    Rooms
    –
    With walls and passages
    –

    Price the drawings for this area

    Floor area decides almost everything about a building project in South Africa: the draughting fee, the building cost, the council scrutiny fee, whether the house fits the coverage allowed on the stand and what a listing says about a home. This calculator adds up the rooms for you, whatever their shape, and converts the answer between square metres, square feet, hectares, acres and the old Cape morgen that still turns up on farm title deeds.

    How to measure a room

    Measure wall to wall inside the room at floor level, in metres, with a tape or a laser measure. Round to the nearest 10 mm (0.01 m). For a room that is not a plain rectangle, pick the shape that matches it best:

    • Rectangle: length times width. Most bedrooms, bathrooms and garages.
    • L-shape: measure the full length and width as if the room were a rectangle, then the length and width of the missing corner. The calculator takes the corner away.
    • Triangle: half the base times the height, for a corner closed off at an angle.
    • Trapezium: two parallel sides and the depth between them, for a room with one splayed wall.
    • Circle: the inside diameter, for a rondavel or a round lapa.

    Anything more complicated can be split into several shapes and added as separate lines: an open plan living room with a bay window is a rectangle plus a trapezium.

    Room total, floor area and the area on plans

    The sum of the rooms is the net area: the floor you can walk on. Plans, building contracts and council forms usually work with the gross area, measured over the outside walls, which also counts the walls themselves and the passages. Tick "add walls and passages" and set your own allowance to see the difference. The 12% the box starts with is the same allowance our quote brief uses when it estimates a house from its rooms; a compact house with few passages needs less, a long house with thick double walls more. The draughtsperson works out the real figure from the drawings.

    Estate agents and sellers often want the gross area for a listing, and buyers compare it with the area on the approved plans. If the two differ by more than a few square metres, something may have been built without approval: see As-Built Drawings and listing floor plans.

    Square metres, square feet, hectares and morgen

    South Africa measures in metric, but square feet still appear in imported house plans, American design software and some older commercial leases. One foot is exactly 0.3048 m, so one square metre is about 10.764 square feet and 100 m² is about 1,076 ft². Stands and farms are measured in square metres and hectares (10,000 m²). Older title deeds and farm descriptions can give the area in morgen: one Cape morgen is about 8,565 m², or 0.857 ha. An acre is 4,046.86 m².

    Once you know the floor area, the plan and building cost calculator turns it into a drawing fee and a building budget, and the stand coverage calculator checks it against your stand.

    Frequently asked questions

    How do I calculate square metres?
    Multiply the length by the width, both in metres. A room 4.2 m long and 3.5 m wide is 4.2 × 3.5 = 14.7 m². For other shapes, split the room into rectangles, triangles or circles and add the parts.
    How many square feet is one square metre?
    About 10.764 square feet, because one foot is exactly 0.3048 m and 0.3048 × 0.3048 = 0.0929 m². To go from square feet to square metres, multiply by 0.0929.
    Is the floor area on plans the same as the room sizes added up?
    No. Plans normally give the gross area over the outside walls, which includes the walls and passages. The rooms added up give the net area, which is smaller. Use the allowance box to see roughly how big the gap is for your house.
    Do I need exact measurements before I ask for plan quotes?
    No. A rough total is enough for a quote. The draughtsperson measures up properly before drawing, especially for an extension or as-built plans of an existing house.

    Free quote request

    Request plan quotes

    Write the brief the way a draughtsperson would ask for it: the project, the rooms or the size, and where you are. Draughtspersons and architects who work in your area quote you directly.

    Client briefDwg PL-01 · scale 1:100

    01The project

    02The plan (optional, it sizes the job)

    BLOCK PLAN · NOT TO SCALE

    Floor area
    -
    Rooms
    -
    Storeys
    -
    Drawing fee
    -

    Choose the rooms to draw the plan. It is a sketch for the draughtsperson, not a design.

    Extras

    03Stand and timing

    04Drawing list (optional)

    1. L01
    2. L02
    Up to 12 lines: drawings, views or visits.
    Needs and options

    05Your details

    Free and no obligation. By sending you agree that we may share your request with suitable draughtspersons, architectural technologists or architects. See our privacy policy.

    Get free plan quotes