Get quotes

Free tool

Plan scale converter

Measure a line on a printed plan and see its real length, or work out how long a wall should be on the drawing. Also finds the scale that fits your paper.

Plan scale converterFree tool · FloorPlan.co.za

01Scale

02Convert

–

03Fit a building on paper

Scale
1:100
1 mm on the plan
–
Plan to real
–
Real to plan
–
Largest scale that fits
–

The scale bar shows the proportions, not the printed size: screens and printers resize drawings. Always check a printed plan against its own scale bar or a known dimension.

Building plans are drawn to scale: at 1:100, one millimetre on the drawing is 100 mm, or 0.1 m, in real life. Scale lets a whole house fit on a sheet of paper, and it lets anyone with a ruler read sizes the draughtsperson did not write down. This converter goes both ways between the plan and the building, turns an area measured on the drawing into square metres, and tells you the largest standard scale at which a building fits on a sheet of A-size paper.

Scales you will see on South African plans

  • 1:100: the usual scale for floor plans, elevations and sections of a house on council submission drawings.
  • 1:50: larger and more detailed, for a small building, a granny flat, a kitchen or bathroom layout, or a working drawing for the builder.
  • 1:20, 1:10 and 1:5: construction details such as a stair, a window head or a roof edge.
  • 1:200, 1:500 and smaller: site plans, the house on the stand, and large buildings or developments.

Every sheet should say its scale and the paper size it was drawn for, for example "1:100 @ A3". A plan drawn for A1 and printed on A3 is no longer at 1:100. That is why measurements written on the drawing always beat a ruler.

Measuring off a plan

Measure the line on the paper in millimetres and enter it under "measured on the plan". At 1:100, a wall that measures 42 mm on the plan is 4.2 m long. For areas, measure the length and width on paper in centimetres and multiply them, or count squares on graph paper, and enter the square centimetres: at 1:100, 1 cm² on paper is 1 m² in the building. Then add up rooms in the square metre calculator.

Drawing your own sketch first? See Floor Plan Drawing for what a sketch should show before you hand it to a draughtsperson, and 3D Floor Plans and Renders if you would rather see the rooms in 3D.

Paper sizes

Drawings use the A series of paper sizes from ISO 216: A4 is 210 × 297 mm, A3 297 × 420 mm, A2 420 × 594 mm, A1 594 × 841 mm and A0 841 × 1,189 mm. The fit check leaves a 20 mm margin all round and a 60 mm strip for the title block, and lays the building in landscape. Many municipalities now take digital submissions, but the drawings are still set out on a sheet size and scale.

Frequently asked questions

What does 1:100 mean on a plan?
One unit on the drawing is 100 units in reality. 1 mm on the plan is 100 mm (0.1 m) on site, so 10 mm on the plan is 1 m.
How do I convert a plan measurement to metres?
Multiply the measurement in millimetres by the scale and divide by 1,000. At 1:50, 64 mm on the plan is 64 × 50 / 1,000 = 3.2 m.
What scale are house plans drawn at in South Africa?
Floor plans, elevations and sections are usually 1:100, with details at 1:20 or 1:10 and site plans at 1:200 or 1:500. Check the scale written on each sheet.
Why does my printed plan not match the scale?
It was probably printed on a different paper size, or the printer scaled it to fit the page. Check a dimension written on the drawing or the scale bar, and print at 100% on the paper size named in the title block.

Sources

A guide for planning only. Your draughtsperson, architect or engineer and your municipality have the final word.

Free quote request

Request plan quotes

Write the brief the way a draughtsperson would ask for it: the project, the rooms or the size, and where you are. Draughtspersons and architects who work in your area quote you directly.

Client briefDwg DR-01 · scale 1:100

01The project

02The plan (optional, it sizes the job)

FOOTPRINT · TO SCALE

Floor area
-
Rooms
-
Storeys
-
Drawing fee
-

Choose the rooms to draw the plan. It is a sketch for the draughtsperson, not a design.

Extras

03Stand and timing

04Drawing list (optional)

  1. L01
  2. L02
Up to 12 lines: drawings, views or visits.
Needs and options

05Your details

Free and no obligation. By sending you agree that we may share your request with suitable draughtspersons, architectural technologists or architects. See our privacy policy.

Get free plan quotes